What is the Makeblock XTool D1? C N C Laser Cutting Machine
XTool D1 is a laser cutter that has actually been developed by Makeblock. C N C Laser Cutting Machine
The company was developed in 2012 by Jasen Wang, that studied aircraft layout at Northwestern Polytechnic College. The firm is dedicated to creating ingenious products to assist individuals share themselves via production. Considering that its production, Makeblock has released several educational robotics, in addition to a coding system for youngsters. It likewise released the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can cutting as well as inscribing a variety of products. Its laser can eliminate detailed forms much faster than a scroll saw or jigsaw, and can be made use of for various tasks. Along with engraving, the D1 can additionally be made use of for other tasks, including developing precious jewelry as well as light tones.
The D1 is a do it yourself kit that can be assembled in only regarding half a hr. Its room is foldable, allowing for easy portability and also efficient ventilation. It is also made of flame-retardant polyester, making it safe from dirt bits. The unit likewise safeguards the functioning surface under the maker.
The XTool D1 is furnished with a laser module that is capable of engrave on metals and also lots of other materials. It has actually an ultra-fine compressed laser place of 0.08 x 0.08 mm. This permits finer engraving as well as higher precision.
The D1 additionally has a high resolution of 1000 DPI, that makes it feasible to inscribe on a wide range of products. The D1 also has an integrated mobile phone app that can be downloaded from the Android Shop or the Apple Application Shop. The application can be used to import laser styles from free vector websites, consisting of Etsy. The D1 can likewise be attached to a computer through USB or WiFi. It can additionally move information using Wi-Fi or a huge ability TF card.
The D1 is capable of etching on Poplar plywood, which is among one of the most commonly utilized timbers for laser cutters. The D1 can additionally cut on various other woods, consisting of difficult maple, walnut, and rosewood. Its laser head is flexible, permitting a 50mm variety. It can also refine materials as much as 10mm thick, which means that it has the ability to engrave on a wide range of materials. The D1 is designed for both house as well as company use.
The XTool D1 comes in two designs: the 20W version and also the 5W version. The 20W version has a larger laser head, and also a smaller sized working location. The 5W design has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a much faster equipment. C N C Laser Cutting Machine
The D1 includes a steel framework, which offers maximum stability and sturdiness. It additionally has a simultaneous belt to improve movement precision. The belt’s moderate tension is needed for precision, particularly when moving at broadband. The synchronous belt can additionally help the maker keep secure and decrease vibration. It can also get rid of the movement gap, enabling fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines to 0.06 mm. This makes it an outstanding selection for mostly all engraving jobs. Its layout is risk-free as well as trustworthy. It is optimal for small companies and also hobbyists.
It can engrave various kinds of steel and also wood. It has the capacity to reduce eight to tenmm plywood in one pass. It additionally has the capability to cut natural leather and also polymer.
It includes a number of accessories. You can get the package pack that includes the Air Assist Establish and Honeycomb Working Panel. It sets you back $119 and also $269, specifically. You can likewise obtain a 1064nm laser head. This head minimizes melt marks in plastic as well as is particularly useful for fragile jewelry designs. It likewise has a motion sensing unit and fire detection sensor.
It additionally includes an emergency quit button. It can be managed with Wi-fi and can import laser styles from cost-free vector websites like Etsy. You can also regulate it using the Makeblock XTool D1 application on Android and iphone.
It has a great focus system. The laser crosshairs relocate as needed as well as transfer to the frame of the artwork. This makes the engraving extremely specific. It can also be used to produce a thickening result, which can be valuable when engraving huge things.
The XTool D1 Pro has actually enhanced functions and laser power. It utilizes a 20W laser component to develop a beam that reduces items in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can reach engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this machine is extremely clever. Alongside the laser module, there is a swivelling arm which you pull out when you intend to concentrate the laser. It assures that you go down the directly the appropriate range from the material. After that you tighten the thumb screw as well as swivel the arm back up. C N C Laser Cutting Machine
XTool D1 Special Features
Below are a few of the leading Unique Attributes of the XTool D1:
Wireless Connectivity
Equipment can be attached via USB or a WiFi. And you can additionally regulate with a smart device app on Android or iphone.
Trimming as well as Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The equipment can cut timber, especially Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would certainly avoid some plastics like PVC and plastic because it launches hydrogen chloride gas while being reduced. This gas is hazardous as well as extremely harsh (your maker will certainly corrosion promptly).
We have actually evaluated the machine with inscription and also reducing different products. You will discover the outcomes of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other machines. This must enable even more precision as well as less mechanical wobble when etching at high speeds. C N C Laser Cutting Machine
Advanced Stepper Motor Drivers
The equipment has a really sophisticated controller board. It has Trinamic stepper electric motor chauffeurs which drive the motors with a pure sine wave. This way the motors are extremely specific and silent. The chauffeurs additionally support homing procedure without utilizing restriction switches over as the chauffeurs determine current with electric motors and also discover the limit in this manner. This is why this maker does not need physical restriction switches for homing.
The device has drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver tool instantly stops if an unintentional touch takes place. This is terrific for individuals who are worried about safety. The device is also suitable with Windows and also Mac OS systems.
The XTool D1 software program is really easy to use. Once you have actually the art work prepared, you can utilize the app to set up the laser. You can also customize the laser settings and develop customized artwork. The application additionally consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can etch over 100 materials. The laser engraver device is easy to use as well as features a safety cover. The equipment has a service warranty of one year.
XTool D1 Engraving
The XTool D1 is a really versatile etching maker. It cam be made use of to etch on all kinds of products/.
Here is a listing of products and also attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered device. Exact, quick and sturdily constructed. It comes with a premium rate, but it deserves it for a person that desires an excellent and practically an industrial quality table leading laser engraver efficient in rapid cutting as well as specific engraving thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving as well as reducing device on our listing is XTool D1 pro, the most effective choice to Glowforge. It remains in top place due to the fact that it has actually received the Red Dot Layout 2022 Award. The superior design and state-of-the-art modern technology set this machine aside from various other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut and etch a substantial range of products, from something as slim as cells paper to something as thick as leather as well as timber panels.
XTool D1 is a diode laser inscription and also reducing device that is compatible with a vast array of materials, including different sorts of timber. Its powerful and also highly concentrated laser can easily reduce and also engraved wood with supreme accuracy and precision.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser component, which is especially created metal as well as plastic inscription. It can engrave various steels, consisting of light weight aluminum and rare-earth elements. It can also do colored etching on various metals, consisting of aluminum.