What is the Makeblock XTool D1? Customized Standard Type Fiber Laser Cutting Machine
XTool D1 is a laser cutter that has been created by Makeblock. Customized Standard Type Fiber Laser Cutting Machine
The company was established in 2012 by Jasen Wang, who researched airplane style at Northwestern Polytechnic University. The business is devoted to creating cutting-edge products to aid people reveal themselves with development. Since its creation, Makeblock has launched a number of educational robots, in addition to a coding system for youngsters. It also introduced the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that is capable of cutting and engraving a selection of products. Its laser can remove detailed shapes much faster than a scroll saw or jigsaw, and can be made use of for several jobs. Along with inscription, the D1 can additionally be made use of for various other tasks, consisting of developing precious jewelry as well as lamp tones.
The D1 is a DIY set that can be assembled in only about half a hr. Its enclosure is collapsible, enabling easy portability and effective air flow. It is likewise made of flame-retardant polyester, making it risk-free from dirt fragments. The enclosure likewise secures the functioning surface under the maker.
The XTool D1 is furnished with a laser component that can engrave on metals and many various other materials. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This permits finer inscription and also greater accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to etch on a variety of materials. The D1 also has an integrated smart device application that can be downloaded and install from the Android Store or the Apple Application Shop. The application can be used to import laser designs from complimentary vector websites, consisting of Etsy. The D1 can also be linked to a computer via USB or WiFi. It can also transfer data by means of Wi-Fi or a big capacity TF card.
The D1 can engraving on Poplar plywood, which is just one of one of the most typically used timbers for laser cutters. The D1 can also reduce on other woods, consisting of hard maple, walnut, and also rosewood. Its laser head is adjustable, allowing for a 50mm array. It can additionally refine materials up to 10mm thick, which means that it has the ability to etch on a wide array of materials. The D1 is made for both home and service use.
The XTool D1 comes in two versions: the 20W version and also the 5W version. The 20W variation has a larger laser head, and a smaller sized working area. The 5W design has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a quicker maker. Customized Standard Type Fiber Laser Cutting Machine
The D1 includes a steel structure, which offers optimum stability as well as sturdiness. It also has a simultaneous belt to enhance activity accuracy. The belt’s moderate stress is needed for precision, particularly when relocating at broadband. The simultaneous belt can additionally assist the equipment stay stable and also minimize vibration. It can also eliminate the activity void, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it an outstanding option for almost all engraving jobs. Its design is secure and also reliable. It is optimal for local business and also enthusiasts.
It can inscribe different types of metal and also wood. It has the capacity to cut eight to tenmm plywood in one pass. It additionally has the capacity to cut natural leather and also polymer.
It features a number of accessories. You can purchase the bundle pack that includes the Air Help Establish as well as Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can also get a 1064nm laser head. This head decreases melt marks in plastic as well as is especially helpful for delicate fashion jewelry styles. It also has a motion sensor and fire discovery sensor.
It also features an emergency quit button. It can be regulated through WiFi and also can import laser designs from cost-free vector websites like Etsy. You can additionally manage it through the Makeblock XTool D1 application on Android as well as iphone.
It has an excellent emphasis mechanism. The laser crosshairs move as needed and also relocate to the frame of the art work. This makes the engraving very specific. It can additionally be made use of to produce a thickening result, which can be helpful when etching big items.
The XTool D1 Pro has improved functions and laser power. It utilizes a 20W laser module to develop a light beam that cuts objects in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It additionally has a greater rate. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is very smart. Alongside the laser component, there is a swivelling arm which you take out when you wish to concentrate the laser. It assures that you drop the head on the appropriate range from the product. After that you tighten up the thumb screw as well as rotate the arm back up. Customized Standard Type Fiber Laser Cutting Machine
XTool D1 Special Features
Right here are a few of the top Special Features of the XTool D1:
Wireless Connection
Machine can be connected using USB or a WiFi. And also you can also manage with a smartphone app on Android or iOS.
Trimming as well as Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The maker can cut timber, especially Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would certainly avoid some plastics like PVC and vinyl because it launches hydrogen chloride gas while being reduced. This gas is harmful and very corrosive (your maker will certainly rust swiftly).
We have actually tested the equipment with engraving as well as cutting different products. You will locate the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all various other devices. This need to enable even more precision and much less mechanical wobble when inscribing at broadband. Customized Standard Type Fiber Laser Cutting Machine
Advanced Stepper Electric Motor Drivers
The machine has a really advanced controller board. It has Trinamic stepper electric motor motorists which drive the motors with a pure sine wave. This way the electric motors are very accurate as well as silent. The drivers also sustain homing procedure without making use of restriction switches as the motorists measure present via electric motors as well as identify the limit this way. This is why this maker does not need physical limitation switches over for homing.
The device has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to detach one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver tool instantly stops if an accidental touch happens. This is great for individuals that are worried regarding safety and security. The device is additionally compatible with Windows and also Mac OS systems.
The XTool D1 software is really easy to use. Once you have the art work prepared, you can use the application to establish the laser. You can additionally personalize the laser setups as well as produce customized artwork. The application also includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can engrave over 100 materials. The laser engraver device is easy to use and also features a protective cover. The maker has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely flexible inscribing device. It cam be used to etch on all sorts of materials/.
Below is a list of products as well as functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out machine. Accurate, quick and well built. It comes with a premium price, but it is worth it for a person that wants a good as well as virtually an industrial quality table leading laser engraver capable of rapid cutting and also specific inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The initial laser inscription and cutting device on our list is XTool D1 pro, the best option to Glowforge. It is in starting point because it has actually gotten the Red Dot Design 2022 Honor. The outstanding layout and also state-of-the-art innovation established this device aside from various other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and inscribe a significant variety of products, from something as slim as cells paper to something as thick as leather as well as timber panels.
XTool D1 is a diode laser engraving and also cutting equipment that is compatible with a large range of products, including different types of wood. Its powerful and highly concentrated laser can quickly cut as well as etched timber with ultimate accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser module, which is particularly produced steel and plastic inscription. It can inscribe different steels, including light weight aluminum as well as rare-earth elements. It can likewise do colored inscribing on different metals, including light weight aluminum.
Customized Standard Type Fiber Laser Cutting Machine Customized Standard Type Fiber Laser Cutting Machine