What is the Makeblock XTool D1? Fiber Optic Laser Cutting Machine Manufacturer
XTool D1 is a laser cutter that has actually been produced by Makeblock. Fiber Optic Laser Cutting Machine Manufacturer
The company was established in 2012 by Jasen Wang, who examined airplane design at Northwestern Polytechnic University. The company is devoted to developing ingenious products to help individuals share themselves via development. Given that its creation, Makeblock has released numerous educational robotics, along with a coding system for youngsters. It additionally released the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that can reducing and also engraving a selection of materials. Its laser can cut out elaborate forms much faster than a scroll saw or jigsaw, and can be utilized for various tasks. In addition to inscription, the D1 can also be utilized for other tasks, including developing precious jewelry and lamp tones.
The D1 is a DIY package that can be put together in only concerning half an hour. Its room is foldable, permitting very easy transportability as well as reliable air flow. It is additionally made from flame-retardant polyester, making it safe from dust fragments. The unit likewise safeguards the functioning surface area under the device.
The XTool D1 is outfitted with a laser module that is capable of engrave on steels as well as several various other materials. It has actually an ultra-fine pressed laser area of 0.08 x 0.08 mm. This allows for finer inscription as well as higher precision.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to inscribe on a wide range of materials. The D1 also has a built-in smartphone application that can be downloaded and install from the Android Shop or the Apple Application Shop. The app can be utilized to import laser designs from free vector websites, including Etsy. The D1 can likewise be connected to a computer system using USB or WiFi. It can additionally move data via Wi-Fi or a big capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is one of one of the most typically utilized timbers for laser cutters. The D1 can additionally cut on various other woods, including hard maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm array. It can additionally process materials approximately 10mm thick, which suggests that it has the ability to inscribe on a variety of materials. The D1 is created for both home and company use.
The XTool D1 comes in two designs: the 20W version and also the 5W version. The 20W version has a larger laser head, as well as a smaller sized working location. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster maker. Fiber Optic Laser Cutting Machine Manufacturer
The D1 includes a steel structure, which supplies optimum security as well as resilience. It likewise has a simultaneous belt to improve movement precision. The belt’s moderate stress is required for accuracy, especially when relocating at high speeds. The synchronous belt can also aid the equipment keep secure and lessen resonance. It can likewise get rid of the motion void, enabling great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an excellent selection for nearly all inscribing jobs. Its layout is safe as well as trusted. It is optimal for small businesses and also enthusiasts.
It can etch different sorts of metal and also timber. It has the capacity to reduce eight to tenmm plywood in one pass. It also has the ability to cut natural leather and acrylic.
It comes with a variety of devices. You can get the bundle pack that includes the Air Assist Establish and also Honeycomb Working Panel. It costs $119 and also $269, specifically. You can also get a 1064nm laser head. This head lowers shed marks in plastic as well as is particularly beneficial for delicate fashion jewelry styles. It additionally has an activity sensing unit and flame discovery sensing unit.
It also includes an emergency situation stop button. It can be regulated via Wi-fi as well as can import laser designs from complimentary vector sites like Etsy. You can likewise manage it through the Makeblock XTool D1 application on Android and iOS.
It has an excellent focus system. The laser crosshairs move as required as well as relocate to the framework of the art work. This makes the engraving really accurate. It can also be utilized to produce a thickening impact, which can be valuable when inscribing big products.
The XTool D1 Pro has enhanced attributes and also laser power. It uses a 20W laser component to produce a beam that reduces things in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a higher rate. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this device is really creative. Alongside the laser module, there is a rotating arm which you pull out when you intend to focus the laser. It guarantees that you go down the directly the correct range from the product. After that you tighten up the thumb screw and also pivot the arm back up. Fiber Optic Laser Cutting Machine Manufacturer
XTool D1 Special Features
Here are several of the top Special Functions of the XTool D1:
Wireless Connectivity
Equipment can be attached through USB or a WiFi. And also you can likewise manage with a mobile phone app on Android or iOS.
Cutting and also Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The maker can cut timber, especially Poplar plywood which is soft as well as it is the recommended timber for all laser cutters.
I would avoid some plastics like PVC and also vinyl since it launches hydrogen chloride gas while being reduced. This gas is toxic and also very destructive (your machine will rust promptly).
We have actually tested the machine with inscription as well as reducing various materials. You will certainly find the results of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other equipments. This ought to permit even more accuracy and less mechanical wobble when engraving at broadband. Fiber Optic Laser Cutting Machine Manufacturer
Advanced Stepper Electric Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper motor vehicle drivers which drive the electric motors with a pure sine wave. By doing this the electric motors are really precise as well as quiet. The drivers additionally support homing treatment without making use of restriction changes as the drivers determine present with motors and find the limit this way. This is why this equipment does not need physical limit switches over for homing.
The maker has motorists for 3 axis– so you can connect in the roller system as a Z axis rather than needing to separate among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device automatically quits if an unintentional touch takes place. This is wonderful for individuals that are concerned concerning security. The device is also compatible with Windows and Mac OS systems.
The XTool D1 software program is very easy to use. Once you have the artwork prepared, you can use the app to establish the laser. You can also customize the laser setups and create customized artwork. The app also consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can etch over 100 products. The laser engraver tool is easy to use as well as comes with a safety cover. The maker has a service warranty of year.
XTool D1 Engraving
The XTool D1 is an extremely functional inscribing device. It cam be utilized to inscribe on all kinds of products/.
Below is a listing of products and features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out device. Exact, fast and also solidly constructed. It comes with a costs price, yet it is worth it for a person that wants a great and also virtually an industrial grade table top laser engraver with the ability of rapid cutting and also exact inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving and also reducing maker on our list is XTool D1 pro, the most effective choice to Glowforge. It remains in first place due to the fact that it has actually obtained the Red Dot Layout 2022 Award. The superior layout and also modern technology established this equipment besides various other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce as well as etch a substantial variety of materials, from something as slim as tissue paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser inscription and also cutting device that works with a wide range of products, including different types of wood. Its powerful and highly concentrated laser can conveniently reduce and also etched wood with best accuracy and also accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is especially produced steel and also plastic engraving. It can inscribe different metals, consisting of light weight aluminum as well as rare-earth elements. It can additionally do colored etching on numerous metals, including aluminum.
Fiber Optic Laser Cutting Machine Manufacturer Fiber Optic Laser Cutting Machine Manufacturer