What is the Makeblock XTool D1? Full Spectrum Laser Wood Engraving Machine
XTool D1 is a laser cutter that has been produced by Makeblock. Full Spectrum Laser Wood Engraving Machine
The company was established in 2012 by Jasen Wang, who examined aircraft style at Northwestern Polytechnic College. The business is dedicated to producing innovative items to assist people express themselves via development. Given that its creation, Makeblock has actually launched numerous educational robots, in addition to a coding platform for children. It likewise launched the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that is capable of reducing as well as inscribing a variety of products. Its laser can remove elaborate shapes much faster than a scroll saw or jigsaw, and can be made use of for many different tasks. Along with inscription, the D1 can additionally be made use of for various other tasks, including producing jewelry and also lamp shades.
The D1 is a DIY set that can be constructed in just concerning half an hour. Its unit is foldable, allowing for simple transportability as well as efficient ventilation. It is additionally constructed from flame-retardant polyester, making it secure from dirt particles. The unit additionally safeguards the functioning surface area under the maker.
The XTool D1 is equipped with a laser module that is capable of engrave on steels and several various other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This permits finer engraving and higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to inscribe on a vast array of products. The D1 likewise has an integrated mobile phone app that can be downloaded and install from the Android Shop or the Apple Application Shop. The application can be used to import laser designs from cost-free vector sites, consisting of Etsy. The D1 can likewise be connected to a computer via USB or WiFi. It can also transfer information via Wi-Fi or a big ability TF card.
The D1 can etching on Poplar plywood, which is among the most typically utilized woods for laser cutters. The D1 can additionally reduce on other timbers, including difficult maple, walnut, and rosewood. Its laser head is flexible, permitting a 50mm variety. It can additionally refine materials approximately 10mm thick, which implies that it has the ability to engrave on a wide range of products. The D1 is made for both residence and also company usage.
The XTool D1 can be found in two versions: the 20W variation as well as the 5W design. The 20W variation has a bigger laser head, and also a smaller sized working location. The 5W model has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster device. Full Spectrum Laser Wood Engraving Machine
The D1 features a steel framework, which offers optimum stability and also longevity. It additionally has a concurrent belt to improve movement accuracy. The belt’s moderate stress is needed for accuracy, especially when moving at broadband. The simultaneous belt can also aid the device remain stable and reduce vibration. It can likewise remove the activity gap, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it an excellent selection for almost all etching jobs. Its style is safe as well as reputable. It is optimal for small companies and also hobbyists.
It can engrave various types of metal as well as wood. It has the capability to reduce 8 to tenmm plywood in one pass. It additionally has the capacity to cut natural leather and also polymer.
It comes with a variety of devices. You can purchase the package pack that includes the Air Help Establish as well as Honeycomb Working Panel. It costs $119 and also $269, specifically. You can likewise obtain a 1064nm laser head. This head reduces melt marks in plastic and also is specifically beneficial for fragile precious jewelry styles. It also has a motion sensor and flame discovery sensing unit.
It also features an emergency quit button. It can be controlled via WiFi as well as can import laser layouts from complimentary vector sites like Etsy. You can also manage it by means of the Makeblock XTool D1 app on Android as well as iphone.
It has a great focus mechanism. The laser crosshairs relocate as required and transfer to the framework of the artwork. This makes the etching very exact. It can additionally be made use of to develop a thickening effect, which can be valuable when inscribing large things.
The XTool D1 Pro has actually enhanced features as well as laser power. It makes use of a 20W laser module to produce a beam of light that reduces objects in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It likewise has a greater rate. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this device is very clever. Beside the laser module, there is a swivelling arm which you pull out when you wish to concentrate the laser. It ensures that you drop the head on the correct range from the product. Then you tighten the thumb screw and also rotate the arm back up. Full Spectrum Laser Wood Engraving Machine
XTool D1 Special Features
Here are a few of the leading Unique Attributes of the XTool D1:
Wireless Connection
Equipment can be connected via USB or a Wi-fi. And you can likewise regulate with a mobile phone application on Android or iphone.
Cutting and also Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a really capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The machine can reduce wood, specifically Poplar plywood which is soft and it is the preferred wood for all laser cutters.
I would certainly avoid some plastics like PVC as well as vinyl given that it releases hydrogen chloride gas while being cut. This gas is toxic as well as extremely destructive (your machine will corrosion quickly).
We have evaluated the maker with engraving as well as cutting various products. You will certainly locate the results of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other equipments. This should permit even more accuracy and less mechanical wobble when etching at broadband. Full Spectrum Laser Wood Engraving Machine
Advanced Stepper Electric Motor Drivers
The machine has an extremely sophisticated controller board. It has Trinamic stepper motor chauffeurs which drive the electric motors with a pure sine wave. By doing this the motors are very precise and silent. The motorists additionally sustain homing procedure without utilizing limitation switches over as the drivers measure current through motors and also detect the limit by doing this. This is why this machine does not need physical limitation changes for homing.
The machine has drivers for 3 axis– so you can connect in the roller system as a Z axis instead of having to disconnect among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver tool immediately quits if an accidental touch happens. This is terrific for individuals who are concerned concerning security. The tool is also suitable with Windows and Mac OS systems.
The XTool D1 software program is extremely easy to use. As soon as you have actually the artwork prepared, you can make use of the application to set up the laser. You can additionally personalize the laser settings and also produce custom artwork. The app additionally consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can inscribe over 100 products. The laser engraver device is easy to use and includes a protective cover. The equipment has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely functional engraving machine. It cam be used to etch on all types of products/.
Right here is a checklist of materials and also features that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered device. Accurate, quick and sturdily built. It comes with a premium cost, however it deserves it for someone that wants a good and nearly an industrial quality table top laser engraver capable of rapid cutting and also precise inscription thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser inscription as well as cutting maker on our listing is XTool D1 pro, the best option to Glowforge. It is in first place because it has gotten the Red Dot Layout 2022 Award. The impressive design and advanced modern technology set this machine aside from other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and inscribe a substantial range of materials, from something as slim as cells paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription and reducing equipment that works with a vast array of products, including different kinds of wood. Its powerful as well as highly concentrated laser can quickly reduce as well as inscribed wood with supreme accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser component, which is particularly made for steel as well as plastic inscription. It can inscribe numerous metals, consisting of light weight aluminum as well as rare-earth elements. It can additionally do colored etching on different metals, consisting of aluminum.
Full Spectrum Laser Wood Engraving Machine Full Spectrum Laser Wood Engraving Machine