What is the Makeblock XTool D1? K40 Laser Power Supply Labeled
XTool D1 is a laser cutter that has actually been produced by Makeblock. K40 Laser Power Supply Labeled
The firm was established in 2012 by Jasen Wang, who studied airplane design at Northwestern Polytechnic College. The business is devoted to producing innovative products to aid people share themselves through development. Since its development, Makeblock has released several instructional robots, in addition to a coding system for children. It likewise introduced the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that can cutting and also etching a range of products. Its laser can eliminate detailed shapes much faster than a scroll saw or jigsaw, and can be used for several tasks. Along with inscription, the D1 can likewise be used for various other tasks, consisting of developing jewelry and also light tones.
The D1 is a DIY set that can be put together in just concerning half an hour. Its unit is foldable, permitting simple transportability and efficient ventilation. It is also constructed from flame-retardant polyester, making it risk-free from dirt particles. The room additionally shields the working surface under the machine.
The XTool D1 is furnished with a laser module that can engrave on steels and several other materials. It has an ultra-fine pressed laser place of 0.08 x 0.08 mm. This allows for finer inscription and greater accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it feasible to engrave on a wide variety of materials. The D1 also has an integrated mobile phone application that can be downloaded and install from the Android Store or the Apple Application Store. The application can be used to import laser styles from cost-free vector sites, including Etsy. The D1 can likewise be attached to a computer system by means of USB or WiFi. It can also transfer data via Wi-Fi or a huge capacity TF card.
The D1 is capable of etching on Poplar plywood, which is among one of the most commonly used woods for laser cutters. The D1 can additionally reduce on other timbers, including hard maple, walnut, and also rosewood. Its laser head is flexible, enabling a 50mm range. It can also refine products approximately 10mm thick, which indicates that it is able to engrave on a wide variety of materials. The D1 is made for both residence and organization use.
The XTool D1 is available in 2 models: the 20W version and also the 5W design. The 20W variation has a bigger laser head, as well as a smaller working location. The 5W version has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker equipment. K40 Laser Power Supply Labeled
The D1 features a steel framework, which gives maximum stability and durability. It likewise has a synchronous belt to improve movement accuracy. The belt’s moderate stress is needed for precision, especially when moving at broadband. The simultaneous belt can likewise aid the maker remain steady and also reduce vibration. It can likewise get rid of the motion void, allowing for fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It generates clear lines to 0.06 mm. This makes it an exceptional choice for mostly all etching jobs. Its design is risk-free as well as reliable. It is excellent for small businesses and also hobbyists.
It can inscribe various kinds of steel and timber. It has the capability to reduce 8 to tenmm plywood in one pass. It additionally has the ability to cut leather and acrylic.
It includes a number of devices. You can get the package pack that consists of the Air Assist Set and Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can likewise get a 1064nm laser head. This head lowers shed marks in plastic and also is specifically useful for delicate fashion jewelry styles. It additionally has a movement sensor as well as flame detection sensor.
It likewise features an emergency situation quit switch. It can be managed with Wi-fi and can import laser designs from cost-free vector websites like Etsy. You can likewise control it through the Makeblock XTool D1 app on Android and also iphone.
It has a very good focus device. The laser crosshairs relocate as required as well as transfer to the framework of the art work. This makes the etching extremely exact. It can also be utilized to produce a thickening result, which can be useful when inscribing huge items.
The XTool D1 Pro has improved attributes as well as laser power. It uses a 20W laser module to develop a beam of light that reduces objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It also has a greater speed. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this equipment is really smart. Alongside the laser component, there is a swivelling arm which you pull out when you intend to focus the laser. It assures that you drop the directly the right range from the material. After that you tighten the thumb screw and swivel the arm back up. K40 Laser Power Supply Labeled
XTool D1 Special Features
Here are a few of the leading Unique Attributes of the XTool D1:
Wireless Connection
Equipment can be linked by means of USB or a Wi-fi. And also you can likewise control with a smart device application on Android or iphone.
Cutting as well as Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also an extremely capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The equipment can reduce timber, especially Poplar plywood which is soft and it is the recommended timber for all laser cutters.
I would avoid some plastics like PVC as well as vinyl since it releases hydrogen chloride gas while being reduced. This gas is toxic and really corrosive (your equipment will certainly corrosion promptly).
We have checked the machine with engraving and also cutting different materials. You will find the outcomes of our tests few phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other machines. This must permit more precision and also much less mechanical wobble when etching at high speeds. K40 Laser Power Supply Labeled
Advanced Stepper Motor Drivers
The equipment has a very sophisticated controller board. It has Trinamic stepper motor drivers which drive the motors with a pure sine wave. By doing this the motors are very exact and also silent. The motorists additionally sustain homing procedure without utilizing restriction switches as the drivers measure current with electric motors as well as identify the limit in this manner. This is why this maker does not need physical limitation switches for homing.
The equipment has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to detach among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver tool instantly stops if an accidental touch happens. This is wonderful for individuals that are concerned regarding safety. The tool is additionally suitable with Windows and also Mac OS systems.
The XTool D1 software is really easy to use. As soon as you have the artwork prepared, you can utilize the app to establish the laser. You can additionally tailor the laser settings as well as create custom-made art work. The application additionally consists of a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can etch over 100 products. The laser engraver tool is easy to use and features a protective cover. The maker has a warranty of one year.
XTool D1 Engraving
The XTool D1 is an extremely versatile etching maker. It cam be utilized to inscribe on all sorts of products/.
Below is a list of products and also attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered device. Exact, rapid and sturdily constructed. It comes at a costs rate, yet it deserves it for somebody that desires a great and practically an industrial grade table top laser engraver capable of fast cutting as well as exact engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription and also reducing device on our listing is XTool D1 pro, the best option to Glowforge. It remains in top place since it has gotten the Red Dot Style 2022 Award. The superior style and also state-of-the-art modern technology established this device in addition to various other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at one time, and XTool D1-10W can cut 10mm wood board at once.
Can XTool D1 cut leather?
XTool can cut as well as etch a significant variety of materials, from something as slim as tissue paper to something as thick as leather and wood panels.
XTool D1 is a diode laser inscription and cutting machine that works with a large range of materials, consisting of different types of timber. Its effective as well as very focused laser can easily cut and etched timber with utmost precision and accuracy.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser component, which is particularly made for steel as well as plastic engraving. It can engrave various steels, including light weight aluminum and also precious metals. It can also do tinted etching on various metals, consisting of light weight aluminum.
K40 Laser Power Supply Labeled K40 Laser Power Supply Labeled