What is the Makeblock XTool D1? Needle Engraving Machine
XTool D1 is a laser cutter that has been created by Makeblock. Needle Engraving Machine
The company was developed in 2012 by Jasen Wang, that studied airplane layout at Northwestern Polytechnic University. The firm is committed to creating ingenious products to help people reveal themselves with production. Given that its production, Makeblock has actually released a number of educational robots, in addition to a coding platform for children. It additionally introduced the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that can reducing and also engraving a range of materials. Its laser can eliminate detailed shapes much faster than a scroll saw or jigsaw, and also can be used for many different projects. Along with inscription, the D1 can likewise be utilized for other projects, consisting of creating jewelry and lamp shades.
The D1 is a DIY kit that can be put together in only regarding half a hr. Its enclosure is foldable, permitting easy portability as well as efficient air flow. It is likewise made of flame-retardant polyester, making it secure from dirt particles. The room likewise protects the functioning surface under the maker.
The XTool D1 is equipped with a laser component that can engrave on steels as well as numerous other materials. It has actually an ultra-fine pressed laser place of 0.08 x 0.08 mm. This permits finer inscription as well as higher accuracy.
The D1 likewise has a high resolution of 1000 DPI, that makes it possible to etch on a wide variety of materials. The D1 additionally has an integrated smart device application that can be downloaded and install from the Android Shop or the Apple App Store. The application can be made use of to import laser styles from cost-free vector sites, including Etsy. The D1 can also be connected to a computer system using USB or WiFi. It can additionally transfer data using Wi-Fi or a huge capability TF card.
The D1 is capable of inscribing on Poplar plywood, which is among one of the most typically made use of timbers for laser cutters. The D1 can likewise reduce on other woods, consisting of tough maple, walnut, as well as rosewood. Its laser head is flexible, enabling a 50mm array. It can likewise refine products approximately 10mm thick, which means that it is able to engrave on a wide range of products. The D1 is developed for both residence as well as service use.
The XTool D1 can be found in two models: the 20W variation and the 5W design. The 20W variation has a larger laser head, as well as a smaller working area. The 5W version has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster maker. Needle Engraving Machine
The D1 includes a steel framework, which gives optimum stability and also toughness. It also has a simultaneous belt to improve activity precision. The belt’s moderate stress is needed for accuracy, particularly when relocating at high speeds. The simultaneous belt can likewise aid the device keep stable and reduce resonance. It can additionally remove the motion void, allowing for fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It creates clear lines down to 0.06 mm. This makes it a superb choice for nearly all engraving jobs. Its design is safe and trustworthy. It is ideal for small businesses as well as enthusiasts.
It can engrave various sorts of metal and also timber. It has the capability to cut eight to tenmm plywood in one pass. It likewise has the capability to reduce natural leather and acrylic.
It includes a variety of devices. You can acquire the bundle pack that consists of the Air Assist Establish and Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can also get a 1064nm laser head. This head lowers shed marks in plastic as well as is particularly beneficial for delicate jewelry styles. It also has a movement sensing unit and fire discovery sensing unit.
It likewise features an emergency stop switch. It can be managed with Wi-fi as well as can import laser designs from cost-free vector websites like Etsy. You can additionally manage it through the Makeblock XTool D1 application on Android and iphone.
It has a great focus system. The laser crosshairs move as required as well as move to the structure of the art work. This makes the etching very accurate. It can likewise be used to produce a thickening impact, which can be valuable when inscribing big products.
The XTool D1 Pro has actually boosted attributes and laser power. It uses a 20W laser component to develop a beam of light that reduces items in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It also has a greater speed. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing method on this maker is very creative. Next to the laser component, there is a swivelling arm which you take out when you wish to focus the laser. It assures that you drop the directly the proper range from the product. Then you tighten up the thumb screw as well as swivel the arm back up. Needle Engraving Machine
XTool D1 Special Features
Right here are a few of the top Unique Features of the XTool D1:
Wireless Connection
Device can be linked using USB or a WiFi. As well as you can likewise regulate with a mobile phone application on Android or iphone.
Trimming and also Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a very capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The machine can reduce timber, especially Poplar plywood which is soft as well as it is the favored timber for all laser cutters.
I would stay clear of some plastics like PVC and vinyl because it releases hydrogen chloride gas while being reduced. This gas is harmful and also extremely corrosive (your maker will certainly corrosion promptly).
We have checked the machine with engraving and reducing different products. You will certainly find the results of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other machines. This should allow for even more precision and also much less mechanical wobble when engraving at high speeds. Needle Engraving Machine
Advanced Stepper Motor Drivers
The device has a very innovative controller board. It has Trinamic stepper electric motor motorists which drive the motors with a pure sine wave. This way the motors are very exact and also silent. The chauffeurs also sustain homing treatment without making use of limit switches as the chauffeurs gauge current with electric motors as well as find the limit by doing this. This is why this equipment does not require physical limitation switches for homing.
The machine has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver device immediately stops if an unexpected touch happens. This is terrific for people that are worried about safety and security. The device is also compatible with Windows and also Mac OS systems.
The XTool D1 software program is really easy to use. When you have the art work prepared, you can make use of the app to establish the laser. You can likewise customize the laser settings and also create customized art work. The app additionally consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can etch over 100 products. The laser engraver tool is easy to use and also features a safety cover. The device has a guarantee of year.
XTool D1 Engraving
The XTool D1 is a really versatile inscribing machine. It cam be used to etch on all sorts of products/.
Below is a checklist of products and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered machine. Specific, rapid and also sturdily developed. It comes at a costs cost, however it deserves it for someone that wants an excellent and virtually a commercial quality table top laser engraver with the ability of fast cutting and accurate inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and reducing machine on our list is XTool D1 pro, the very best option to Glowforge. It remains in first place due to the fact that it has received the Red Dot Design 2022 Honor. The exceptional layout as well as state-of-the-art technology established this equipment apart from other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, as well as XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a huge selection of products, from something as slim as cells paper to something as thick as natural leather as well as timber panels.
XTool D1 is a diode laser inscription and also cutting maker that works with a variety of products, consisting of different kinds of timber. Its powerful as well as highly concentrated laser can quickly reduce and etched timber with ultimate precision and accuracy.
Can the XTool D1 engrave alliminum?
You can additionally obtain the infrared laser module, which is specifically produced steel as well as plastic engraving. It can inscribe various metals, consisting of light weight aluminum and also precious metals. It can likewise do colored engraving on different metals, consisting of aluminum.