What is the Makeblock XTool D1? Oem Galvo Type Co2 Laser Engraving Machine
XTool D1 is a laser cutter that has actually been developed by Makeblock. Oem Galvo Type Co2 Laser Engraving Machine
The company was established in 2012 by Jasen Wang, who studied aircraft design at Northwestern Polytechnic University. The company is devoted to producing cutting-edge products to assist individuals reveal themselves with development. Since its development, Makeblock has actually released numerous academic robots, in addition to a coding platform for youngsters. It also launched the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can cutting as well as etching a selection of products. Its laser can remove complex forms much faster than a scroll saw or jigsaw, and also can be utilized for many different tasks. Along with inscription, the D1 can also be used for various other jobs, consisting of developing jewelry as well as light tones.
The D1 is a DIY set that can be constructed in just about half a hr. Its enclosure is foldable, permitting very easy transportability as well as efficient ventilation. It is also constructed from flame-retardant polyester, making it risk-free from dirt fragments. The unit additionally shields the working surface area under the machine.
The XTool D1 is geared up with a laser component that can engrave on steels as well as several various other products. It has an ultra-fine compressed laser place of 0.08 x 0.08 mm. This enables finer engraving and also greater precision.
The D1 likewise has a high resolution of 1000 DPI, which makes it feasible to inscribe on a vast array of materials. The D1 also has a built-in mobile phone app that can be downloaded and install from the Android Shop or the Apple Application Store. The application can be made use of to import laser styles from free vector websites, including Etsy. The D1 can also be linked to a computer system via USB or WiFi. It can additionally move information via Wi-Fi or a large capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is one of one of the most typically used woods for laser cutters. The D1 can also reduce on other woods, consisting of hard maple, walnut, and also rosewood. Its laser head is adjustable, enabling a 50mm range. It can also process materials approximately 10mm thick, which suggests that it has the ability to engrave on a variety of products. The D1 is created for both residence as well as organization usage.
The XTool D1 comes in two designs: the 20W variation as well as the 5W model. The 20W variation has a larger laser head, and also a smaller sized working area. The 5W version has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster maker. Oem Galvo Type Co2 Laser Engraving Machine
The D1 includes a steel framework, which offers maximum security and also toughness. It additionally has a synchronous belt to boost movement accuracy. The belt’s moderate tension is required for precision, especially when moving at broadband. The concurrent belt can additionally assist the device remain stable as well as minimize resonance. It can likewise remove the movement space, permitting great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It creates clear lines down to 0.06 mm. This makes it a superb choice for nearly all engraving tasks. Its design is safe and also dependable. It is ideal for local business as well as enthusiasts.
It can etch different types of metal and also timber. It has the ability to reduce eight to tenmm plywood in one pass. It also has the capacity to cut leather and polymer.
It features a variety of devices. You can buy the package pack that consists of the Air Assist Establish and also Honeycomb Working Panel. It costs $119 and also $269, specifically. You can likewise get a 1064nm laser head. This head lowers shed marks in plastic and also is particularly helpful for fragile fashion jewelry styles. It additionally has a movement sensor and fire detection sensing unit.
It likewise includes an emergency stop switch. It can be managed through Wi-fi as well as can import laser designs from free vector sites like Etsy. You can also manage it by means of the Makeblock XTool D1 application on Android and iOS.
It has a great emphasis device. The laser crosshairs move as required as well as transfer to the framework of the artwork. This makes the etching very specific. It can additionally be used to create a thickening impact, which can be beneficial when engraving large products.
The XTool D1 Pro has actually boosted features and also laser power. It uses a 20W laser module to create a beam of light that reduces objects in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It additionally has a higher rate. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this machine is really smart. Next to the laser module, there is a pivoting arm which you take out when you want to concentrate the laser. It assures that you drop the directly the proper range from the material. Then you tighten up the thumb screw as well as pivot the arm back up. Oem Galvo Type Co2 Laser Engraving Machine
XTool D1 Special Features
Right here are a few of the top Unique Attributes of the XTool D1:
Wireless Connectivity
Machine can be connected via USB or a Wi-fi. And you can additionally manage with a mobile phone application on Android or iOS.
Trimming as well as Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also a really qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can cut wood, specifically Poplar plywood which is soft as well as it is the recommended wood for all laser cutters.
I would avoid some plastics like PVC as well as plastic considering that it releases hydrogen chloride gas while being reduced. This gas is hazardous as well as extremely harsh (your maker will certainly corrosion quickly).
We have checked the maker with inscription and also reducing different products. You will discover the results of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other machines. This should enable more precision as well as less mechanical wobble when engraving at high speeds. Oem Galvo Type Co2 Laser Engraving Machine
Advanced Stepper Motor Drivers
The maker has a very advanced controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. By doing this the motors are really precise as well as silent. The motorists also sustain homing treatment without making use of restriction changes as the vehicle drivers measure present through electric motors and also discover the limit by doing this. This is why this machine does not need physical restriction switches over for homing.
The maker has motorists for 3 axis– so you can connect in the roller system as a Z axis instead of needing to separate one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver device immediately stops if an unintentional touch happens. This is wonderful for individuals who are worried concerning security. The tool is likewise compatible with Windows as well as Mac OS systems.
The XTool D1 software program is extremely easy to use. Once you have the art work prepared, you can make use of the application to establish the laser. You can also personalize the laser settings and also develop custom artwork. The app additionally includes a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can etch over 100 materials. The laser engraver device is easy to use and features a protective cover. The equipment has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a really flexible etching machine. It cam be used to etch on all sorts of materials/.
Right here is a list of materials as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered equipment. Exact, fast as well as solidly developed. It comes at a costs price, however it deserves it for a person that desires a great as well as nearly an industrial quality table top laser engraver capable of quick cutting as well as precise engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and cutting machine on our checklist is XTool D1 pro, the very best option to Glowforge. It remains in top place because it has received the Red Dot Style 2022 Award. The impressive design and also advanced modern technology set this machine in addition to other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, as well as XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut and also inscribe a substantial variety of materials, from something as slim as tissue paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser inscription as well as reducing maker that works with a large range of materials, including various types of wood. Its powerful as well as extremely concentrated laser can quickly reduce and engraved wood with best precision as well as accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is especially made for steel and also plastic inscription. It can engrave various steels, including aluminum and also rare-earth elements. It can also do tinted engraving on numerous metals, consisting of aluminum.
Oem Galvo Type Co2 Laser Engraving Machine Oem Galvo Type Co2 Laser Engraving Machine