What is the Makeblock XTool D1? Pipe Cutting Laser Machine
XTool D1 is a laser cutter that has been developed by Makeblock. Pipe Cutting Laser Machine
The firm was developed in 2012 by Jasen Wang, that examined aircraft layout at Northwestern Polytechnic University. The company is devoted to producing cutting-edge products to assist people reveal themselves through development. Since its creation, Makeblock has launched several educational robotics, in addition to a coding system for children. It additionally introduced the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that is capable of cutting as well as inscribing a range of products. Its laser can remove elaborate shapes much faster than a scroll saw or jigsaw, and can be used for several jobs. Along with inscription, the D1 can likewise be made use of for various other jobs, consisting of producing fashion jewelry and also lamp tones.
The D1 is a do it yourself kit that can be put together in just concerning half an hour. Its room is collapsible, allowing for simple mobility and also reliable ventilation. It is additionally made of flame-retardant polyester, making it risk-free from dirt bits. The enclosure likewise secures the functioning surface under the machine.
The XTool D1 is equipped with a laser module that can engrave on steels and lots of various other products. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This enables finer engraving and higher precision.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to inscribe on a wide variety of materials. The D1 also has a built-in smart device application that can be downloaded and install from the Android Store or the Apple App Shop. The app can be made use of to import laser layouts from complimentary vector websites, including Etsy. The D1 can likewise be attached to a computer through USB or WiFi. It can likewise transfer data by means of Wi-Fi or a huge ability TF card.
The D1 can engraving on Poplar plywood, which is just one of the most generally used woods for laser cutters. The D1 can likewise cut on various other woods, consisting of difficult maple, walnut, and also rosewood. Its laser head is flexible, enabling a 50mm range. It can likewise refine materials approximately 10mm thick, which implies that it is able to etch on a wide array of materials. The D1 is created for both home and company use.
The XTool D1 is available in two designs: the 20W variation as well as the 5W model. The 20W variation has a bigger laser head, and also a smaller sized working area. The 5W design has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a much faster maker. Pipe Cutting Laser Machine
The D1 features a steel frame, which supplies optimum security as well as resilience. It additionally has a synchronous belt to boost activity accuracy. The belt’s moderate stress is required for precision, specifically when relocating at broadband. The concurrent belt can also assist the device stay secure and lessen resonance. It can additionally eliminate the motion void, enabling fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It generates clear lines to 0.06 mm. This makes it a superb option for mostly all engraving tasks. Its layout is risk-free and also dependable. It is optimal for local business and also hobbyists.
It can etch different sorts of metal and timber. It has the ability to reduce eight to tenmm plywood in one pass. It additionally has the ability to cut natural leather as well as acrylic.
It features a number of devices. You can purchase the package pack that includes the Air Assist Set and also Honeycomb Working Panel. It costs $119 as well as $269, specifically. You can additionally obtain a 1064nm laser head. This head lowers shed marks in plastic and is especially useful for fragile fashion jewelry styles. It additionally has a movement sensor as well as flame detection sensor.
It also features an emergency situation stop switch. It can be controlled through WiFi as well as can import laser layouts from totally free vector websites like Etsy. You can additionally control it through the Makeblock XTool D1 app on Android and also iOS.
It has a very good emphasis mechanism. The laser crosshairs move as needed as well as transfer to the frame of the artwork. This makes the engraving very specific. It can also be used to create a thickening effect, which can be valuable when engraving huge items.
The XTool D1 Pro has enhanced functions and laser power. It makes use of a 20W laser module to create a beam of light that reduces things in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It additionally has a higher speed. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is really clever. Beside the laser component, there is a rotating arm which you pull out when you want to concentrate the laser. It ensures that you go down the directly the right range from the material. Then you tighten up the thumb screw as well as pivot the arm back up. Pipe Cutting Laser Machine
XTool D1 Special Features
Right here are some of the top Special Attributes of the XTool D1:
Wireless Connection
Equipment can be linked using USB or a WiFi. As well as you can likewise manage with a mobile phone application on Android or iOS.
Cutting and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally a very capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The maker can reduce timber, especially Poplar plywood which is soft and it is the favored wood for all laser cutters.
I would prevent some plastics like PVC and plastic considering that it releases hydrogen chloride gas while being reduced. This gas is hazardous and extremely corrosive (your machine will corrosion rapidly).
We have evaluated the maker with engraving and also cutting different materials. You will find the outcomes of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other devices. This ought to enable more precision and also less mechanical wobble when etching at high speeds. Pipe Cutting Laser Machine
Advanced Stepper Electric Motor Drivers
The device has a very advanced controller board. It has Trinamic stepper electric motor vehicle drivers which drive the motors with a pure sine wave. In this manner the electric motors are extremely precise and also quiet. The drivers likewise support homing treatment without making use of limit changes as the motorists gauge current through motors and identify the limit this way. This is why this maker does not require physical limit switches for homing.
The machine has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis instead of needing to detach among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver device automatically quits if an accidental touch happens. This is terrific for people that are concerned concerning security. The device is also suitable with Windows as well as Mac OS systems.
The XTool D1 software application is very easy to use. As soon as you have the artwork prepared, you can utilize the application to establish the laser. You can additionally customize the laser setups as well as create custom-made artwork. The application also includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can etch over 100 products. The laser engraver tool is easy to use as well as comes with a protective cover. The equipment has a guarantee of twelve month.
XTool D1 Engraving
The XTool D1 is a really versatile inscribing device. It cam be used to inscribe on all kinds of materials/.
Here is a list of materials as well as attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered device. Accurate, fast as well as sturdily developed. It comes at a costs cost, however it is worth it for somebody that desires a good and also almost an industrial grade table leading laser engraver with the ability of fast cutting and also accurate inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The first laser inscription and also cutting equipment on our checklist is XTool D1 pro, the best alternative to Glowforge. It is in top place because it has actually obtained the Red Dot Style 2022 Honor. The exceptional design and also state-of-the-art modern technology set this machine besides other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, and XTool D1-10W can reduce 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can reduce as well as inscribe a significant selection of materials, from something as slim as cells paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser inscription and also reducing machine that is compatible with a wide variety of products, consisting of various kinds of timber. Its effective and also extremely concentrated laser can easily cut and engraved timber with best accuracy and precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is specifically made for steel and also plastic engraving. It can engrave numerous metals, consisting of aluminum and also rare-earth elements. It can also do tinted inscribing on numerous steels, consisting of light weight aluminum.