What is the Makeblock XTool D1? Uv Laser Cutting Machine For Sale
XTool D1 is a laser cutter that has been developed by Makeblock. Uv Laser Cutting Machine For Sale
The company was developed in 2012 by Jasen Wang, that examined aircraft layout at Northwestern Polytechnic University. The company is dedicated to producing ingenious products to aid individuals share themselves with production. Considering that its production, Makeblock has released a number of instructional robotics, as well as a coding system for children. It additionally launched the MakeX Robotic Competitors.
The XTool D1 is a portable laser engraver that is capable of reducing and also engraving a selection of materials. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, and also can be used for various tasks. In addition to engraving, the D1 can also be used for other tasks, consisting of developing precious jewelry and also light tones.
The D1 is a DIY set that can be constructed in just about half a hr. Its unit is collapsible, permitting easy portability and reliable ventilation. It is additionally made from flame-retardant polyester, making it risk-free from dirt bits. The room additionally shields the functioning surface area under the maker.
The XTool D1 is outfitted with a laser module that can engrave on metals as well as lots of various other products. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This allows for finer engraving as well as higher accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it possible to engrave on a vast array of products. The D1 additionally has a built-in smartphone app that can be downloaded and install from the Android Store or the Apple Application Shop. The app can be utilized to import laser designs from cost-free vector sites, consisting of Etsy. The D1 can additionally be attached to a computer by means of USB or WiFi. It can likewise move data by means of Wi-Fi or a big ability TF card.
The D1 is capable of etching on Poplar plywood, which is among one of the most typically made use of timbers for laser cutters. The D1 can also cut on various other woods, including difficult maple, walnut, and also rosewood. Its laser head is adjustable, allowing for a 50mm array. It can also refine products approximately 10mm thick, which suggests that it has the ability to inscribe on a variety of products. The D1 is designed for both house and also service usage.
The XTool D1 comes in two models: the 20W variation and also the 5W version. The 20W variation has a larger laser head, as well as a smaller working area. The 5W model has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a faster maker. Uv Laser Cutting Machine For Sale
The D1 includes a steel structure, which gives maximum security and toughness. It also has a concurrent belt to enhance motion precision. The belt’s modest stress is needed for accuracy, especially when moving at broadband. The simultaneous belt can likewise assist the maker keep stable and decrease resonance. It can additionally get rid of the movement space, enabling fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it an excellent choice for almost all inscribing tasks. Its design is secure as well as trustworthy. It is suitable for small businesses and hobbyists.
It can etch different types of steel and timber. It has the capability to cut eight to tenmm plywood in one pass. It additionally has the ability to reduce natural leather and also acrylic.
It features a number of accessories. You can acquire the package pack that consists of the Air Help Establish and Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can likewise get a 1064nm laser head. This head lowers burn marks in plastic as well as is especially useful for delicate fashion jewelry designs. It also has a motion sensor and also fire discovery sensing unit.
It additionally features an emergency situation quit button. It can be managed through WiFi and can import laser layouts from totally free vector websites like Etsy. You can additionally manage it using the Makeblock XTool D1 app on Android and also iOS.
It has a great emphasis mechanism. The laser crosshairs move as required and relocate to the frame of the artwork. This makes the engraving really precise. It can additionally be made use of to create a thickening effect, which can be valuable when engraving huge products.
The XTool D1 Pro has actually improved features and laser power. It uses a 20W laser module to develop a beam that reduces items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a higher rate. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is very brilliant. Next to the laser module, there is a rotating arm which you pull out when you wish to focus the laser. It assures that you go down the head on the right distance from the material. After that you tighten the thumb screw as well as pivot the arm back up. Uv Laser Cutting Machine For Sale
XTool D1 Special Features
Right here are a few of the leading Unique Features of the XTool D1:
Wireless Connection
Equipment can be attached using USB or a Wi-fi. And also you can also regulate with a smartphone app on Android or iOS.
Cutting and also Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also a really capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The machine can cut wood, specifically Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would certainly avoid some plastics like PVC and also plastic considering that it launches hydrogen chloride gas while being cut. This gas is toxic and also very corrosive (your equipment will rust rapidly).
We have evaluated the device with engraving as well as reducing different materials. You will certainly discover the outcomes of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all other makers. This must permit even more accuracy and also less mechanical wobble when engraving at broadband. Uv Laser Cutting Machine For Sale
Advanced Stepper Motor Drivers
The machine has a really advanced controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. This way the motors are very exact as well as silent. The drivers likewise support homing procedure without using limitation changes as the motorists measure existing via electric motors as well as discover the limit in this manner. This is why this maker does not need physical limitation changes for homing.
The maker has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver tool automatically stops if an unintentional touch occurs. This is fantastic for people that are worried regarding safety. The tool is likewise suitable with Windows and also Mac OS systems.
The XTool D1 software application is really easy to use. Once you have actually the artwork prepared, you can make use of the app to establish the laser. You can likewise tailor the laser settings and also create personalized art work. The application additionally consists of a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can etch over 100 products. The laser engraver tool is easy to use and comes with a safety cover. The machine has a guarantee of twelve month.
XTool D1 Engraving
The XTool D1 is an extremely flexible inscribing device. It cam be made use of to etch on all types of materials/.
Here is a listing of materials as well as attributes that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out maker. Exact, rapid and sturdily constructed. It comes at a premium cost, however it deserves it for someone that wants an excellent as well as nearly a commercial grade table top laser engraver capable of fast cutting as well as precise engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription as well as cutting device on our checklist is XTool D1 pro, the very best option to Glowforge. It is in top place because it has actually obtained the Red Dot Layout 2022 Award. The impressive style and also cutting edge modern technology set this machine in addition to other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, as well as XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and etch a massive selection of products, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser inscription and cutting machine that is compatible with a wide range of materials, consisting of different kinds of timber. Its powerful as well as very concentrated laser can easily cut as well as engraved wood with best accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is particularly created metal and also plastic engraving. It can inscribe different metals, including aluminum as well as rare-earth elements. It can additionally do colored inscribing on numerous steels, including aluminum.
Uv Laser Cutting Machine For Sale Uv Laser Cutting Machine For Sale