What is the Makeblock XTool D1? Xtool D1 Controller
XTool D1 is a laser cutter that has been created by Makeblock. Xtool D1 Controller
The company was established in 2012 by Jasen Wang, who studied airplane layout at Northwestern Polytechnic University. The company is dedicated to creating cutting-edge products to aid people reveal themselves with creation. Because its development, Makeblock has released a number of educational robots, in addition to a coding system for youngsters. It additionally introduced the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can reducing and also inscribing a range of products. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, and can be made use of for many different projects. In addition to engraving, the D1 can additionally be utilized for other jobs, including creating jewelry as well as light shades.
The D1 is a DIY package that can be assembled in just concerning half an hour. Its room is foldable, allowing for easy mobility as well as efficient ventilation. It is also made of flame-retardant polyester, making it safe from dust particles. The enclosure additionally secures the functioning surface under the equipment.
The XTool D1 is equipped with a laser module that can engrave on metals and numerous various other materials. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This allows for finer inscription and greater precision.
The D1 also has a high resolution of 1000 DPI, that makes it possible to etch on a wide variety of materials. The D1 likewise has a built-in smart device application that can be downloaded and install from the Android Shop or the Apple App Store. The application can be used to import laser layouts from cost-free vector websites, including Etsy. The D1 can additionally be attached to a computer via USB or WiFi. It can additionally transfer information through Wi-Fi or a huge capacity TF card.
The D1 can engraving on Poplar plywood, which is among one of the most typically made use of woods for laser cutters. The D1 can also reduce on various other timbers, including difficult maple, walnut, and rosewood. Its laser head is adjustable, allowing for a 50mm array. It can also process materials approximately 10mm thick, which means that it is able to etch on a variety of materials. The D1 is created for both house and also service use.
The XTool D1 comes in 2 versions: the 20W version as well as the 5W design. The 20W variation has a bigger laser head, as well as a smaller working location. The 5W version has a workspace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a quicker equipment. Xtool D1 Controller
The D1 features a steel frame, which offers maximum security as well as resilience. It additionally has a concurrent belt to boost movement accuracy. The belt’s moderate tension is needed for accuracy, especially when moving at high speeds. The concurrent belt can additionally help the maker remain steady and lessen resonance. It can additionally remove the activity gap, enabling great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It creates clear lines to 0.06 mm. This makes it an exceptional option for mostly all etching tasks. Its layout is risk-free and also reliable. It is optimal for local business and hobbyists.
It can engrave various kinds of metal and also timber. It has the capacity to reduce 8 to tenmm plywood in one pass. It additionally has the capability to reduce leather and also polymer.
It comes with a number of devices. You can get the bundle pack that consists of the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 and $269, respectively. You can also obtain a 1064nm laser head. This head reduces burn marks in plastic and is specifically helpful for fragile fashion jewelry designs. It likewise has a movement sensing unit and fire discovery sensing unit.
It additionally includes an emergency situation stop button. It can be regulated through WiFi as well as can import laser styles from cost-free vector sites like Etsy. You can likewise manage it via the Makeblock XTool D1 application on Android and iOS.
It has a very good emphasis system. The laser crosshairs move as required and move to the framework of the artwork. This makes the inscribing really precise. It can also be made use of to produce a thickening result, which can be beneficial when etching big items.
The XTool D1 Pro has improved features as well as laser power. It uses a 20W laser component to develop a beam of light that cuts objects in one pass. It can puncture 8mm black acrylic and 10mm basswood. It also has a higher speed. It can get to inscribing accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this equipment is extremely smart. Next to the laser module, there is a swivelling arm which you take out when you intend to focus the laser. It assures that you go down the head on the right distance from the product. Then you tighten the thumb screw as well as rotate the arm back up. Xtool D1 Controller
XTool D1 Special Features
Right here are some of the leading Special Features of the XTool D1:
Wireless Connectivity
Maker can be attached via USB or a WiFi. As well as you can likewise manage with a smartphone application on Android or iOS.
Trimming and Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally a really capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The device can cut wood, specifically Poplar plywood which is soft as well as it is the favored wood for all laser cutters.
I would certainly avoid some plastics like PVC as well as plastic since it releases hydrogen chloride gas while being cut. This gas is hazardous and really destructive (your machine will certainly rust quickly).
We have actually tested the device with engraving and reducing different products. You will certainly discover the results of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other devices. This ought to allow for even more precision as well as less mechanical wobble when inscribing at broadband. Xtool D1 Controller
Advanced Stepper Electric Motor Drivers
The device has a very innovative controller board. It has Trinamic stepper motor vehicle drivers which drive the motors with a pure sine wave. In this manner the motors are really precise and quiet. The vehicle drivers additionally sustain homing treatment without making use of limitation switches over as the chauffeurs measure present with motors as well as discover the limit this way. This is why this maker does not require physical limitation changes for homing.
The equipment has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis instead of needing to separate one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be controlled via Wi-Fi or USB. The laser engraver tool immediately stops if an unintended touch happens. This is fantastic for people that are worried about safety and security. The device is also suitable with Windows and Mac OS systems.
The XTool D1 software is extremely easy to use. As soon as you have actually the art work prepared, you can make use of the app to set up the laser. You can likewise tailor the laser settings and also produce custom-made art work. The app likewise includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can inscribe over 100 materials. The laser engraver tool is easy to use and comes with a safety cover. The maker has a warranty of one year.
XTool D1 Engraving
The XTool D1 is an extremely functional etching device. It cam be used to engrave on all sorts of materials/.
Right here is a list of materials as well as functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out maker. Precise, quick as well as solidly built. It comes at a premium cost, but it deserves it for a person that wants a great and practically a commercial quality table top laser engraver with the ability of fast cutting and accurate engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription and cutting machine on our checklist is XTool D1 pro, the very best option to Glowforge. It remains in starting point because it has actually gotten the Red Dot Style 2022 Award. The impressive layout and modern technology set this equipment besides various other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and also engrave a substantial range of materials, from something as slim as tissue paper to something as thick as leather and also wood panels.
XTool D1 is a diode laser inscription and also reducing device that is compatible with a wide range of products, including different types of wood. Its powerful as well as highly focused laser can conveniently cut and engraved timber with supreme precision as well as precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is specifically created metal and also plastic inscription. It can inscribe numerous steels, consisting of aluminum and also precious metals. It can also do tinted engraving on different metals, including aluminum.