What is the Makeblock XTool D1? Xtool D1 Manual
XTool D1 is a laser cutter that has actually been created by Makeblock. Xtool D1 Manual
The business was developed in 2012 by Jasen Wang, who researched aircraft design at Northwestern Polytechnic College. The firm is committed to creating cutting-edge items to aid individuals reveal themselves with creation. Considering that its development, Makeblock has released numerous educational robots, along with a coding platform for children. It additionally launched the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that can reducing and etching a selection of materials. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, as well as can be utilized for various jobs. Along with inscription, the D1 can additionally be utilized for various other tasks, including creating precious jewelry and also light tones.
The D1 is a DIY set that can be constructed in only about half an hour. Its unit is collapsible, allowing for simple transportability and also efficient air flow. It is also made from flame-retardant polyester, making it risk-free from dust particles. The enclosure additionally safeguards the working surface under the equipment.
The XTool D1 is geared up with a laser component that is capable of engrave on steels as well as lots of other products. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This enables finer inscription and greater accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it possible to inscribe on a vast array of materials. The D1 likewise has an integrated mobile phone application that can be downloaded from the Android Store or the Apple Application Shop. The application can be used to import laser designs from free vector sites, consisting of Etsy. The D1 can additionally be attached to a computer via USB or WiFi. It can also move information through Wi-Fi or a big ability TF card.
The D1 can engraving on Poplar plywood, which is one of one of the most generally used woods for laser cutters. The D1 can additionally reduce on various other timbers, including tough maple, walnut, as well as rosewood. Its laser head is adjustable, permitting a 50mm range. It can additionally refine materials approximately 10mm thick, which implies that it has the ability to engrave on a variety of materials. The D1 is developed for both house and also business use.
The XTool D1 comes in 2 versions: the 20W version and also the 5W design. The 20W version has a larger laser head, as well as a smaller working location. The 5W model has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster machine. Xtool D1 Manual
The D1 features a steel structure, which provides maximum stability and also toughness. It additionally has a simultaneous belt to enhance motion accuracy. The belt’s moderate tension is needed for accuracy, particularly when relocating at high speeds. The concurrent belt can additionally aid the machine remain stable as well as reduce vibration. It can likewise eliminate the movement void, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it a superb option for mostly all etching tasks. Its design is risk-free and also dependable. It is suitable for local business and enthusiasts.
It can engrave different sorts of metal as well as wood. It has the ability to cut 8 to tenmm plywood in one pass. It additionally has the ability to cut leather and also acrylic.
It comes with a variety of devices. You can buy the package pack that consists of the Air Assist Establish and also Honeycomb Working Panel. It costs $119 and $269, respectively. You can additionally get a 1064nm laser head. This head lowers shed marks in plastic as well as is especially valuable for delicate jewelry layouts. It also has a movement sensing unit as well as flame detection sensor.
It additionally features an emergency quit switch. It can be controlled with Wi-fi and can import laser designs from complimentary vector sites like Etsy. You can also manage it through the Makeblock XTool D1 app on Android and also iphone.
It has a great emphasis mechanism. The laser crosshairs move as required and also transfer to the framework of the art work. This makes the engraving extremely exact. It can additionally be made use of to create a thickening result, which can be useful when inscribing huge products.
The XTool D1 Pro has actually boosted functions as well as laser power. It utilizes a 20W laser component to produce a beam of light that cuts things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It likewise has a greater rate. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this maker is really brilliant. Alongside the laser module, there is a pivoting arm which you pull out when you wish to focus the laser. It guarantees that you drop the head on the right range from the product. Then you tighten up the thumb screw and also pivot the arm back up. Xtool D1 Manual
XTool D1 Special Features
Here are a few of the top Special Functions of the XTool D1:
Wireless Connectivity
Maker can be linked by means of USB or a Wi-fi. As well as you can additionally control with a smartphone application on Android or iphone.
Trimming and Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also a very capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The maker can cut wood, particularly Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would avoid some plastics like PVC and vinyl since it launches hydrogen chloride gas while being reduced. This gas is harmful as well as very destructive (your maker will certainly rust quickly).
We have actually checked the device with inscription and reducing various materials. You will find the results of our tests couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all other makers. This should enable more accuracy as well as much less mechanical wobble when inscribing at broadband. Xtool D1 Manual
Advanced Stepper Electric Motor Drivers
The device has a very advanced controller board. It has Trinamic stepper motor drivers which drive the motors with a pure sine wave. This way the motors are extremely exact and quiet. The drivers additionally support homing treatment without utilizing restriction changes as the drivers determine existing through electric motors and find the limit in this manner. This is why this equipment does not need physical limit switches for homing.
The device has vehicle drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to detach among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver tool immediately stops if an unintended touch takes place. This is terrific for individuals who are concerned concerning safety. The tool is also compatible with Windows as well as Mac OS systems.
The XTool D1 software program is extremely easy to use. When you have the artwork prepared, you can utilize the application to set up the laser. You can also tailor the laser setups and produce custom art work. The application likewise consists of a materials listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can inscribe over 100 materials. The laser engraver device is easy to use and also comes with a safety cover. The maker has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is an extremely functional engraving maker. It cam be used to etch on all sorts of products/.
Right here is a listing of products and also functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered machine. Specific, fast and also solidly built. It comes at a premium cost, yet it deserves it for someone that wants an excellent and also practically an industrial quality table top laser engraver with the ability of rapid cutting and also accurate inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The very first laser engraving as well as cutting equipment on our listing is XTool D1 pro, the best alternative to Glowforge. It remains in starting point because it has gotten the Red Dot Style 2022 Honor. The exceptional style and also advanced technology set this maker apart from various other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut as well as inscribe a big variety of materials, from something as slim as tissue paper to something as thick as leather as well as wood panels.
XTool D1 is a diode laser inscription and also cutting maker that is compatible with a variety of materials, consisting of different kinds of wood. Its effective as well as extremely concentrated laser can conveniently reduce and etched wood with best accuracy and precision.
Can the XTool D1 engrave alliminum?
You can also get the infrared laser component, which is specifically created steel and plastic engraving. It can etch different metals, including aluminum and also precious metals. It can also do colored inscribing on various metals, including aluminum.