What is the Makeblock XTool D1? Xtool Vag401 Menus
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool Vag401 Menus
The firm was established in 2012 by Jasen Wang, that studied aircraft layout at Northwestern Polytechnic University. The company is devoted to producing innovative products to assist people reveal themselves with creation. Given that its production, Makeblock has launched numerous instructional robots, along with a coding platform for youngsters. It likewise launched the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that is capable of reducing and also inscribing a range of products. Its laser can remove elaborate forms much faster than a scroll saw or jigsaw, and also can be used for many different jobs. Along with engraving, the D1 can additionally be used for other projects, including developing fashion jewelry and lamp shades.
The D1 is a do it yourself set that can be set up in just about half an hour. Its unit is foldable, permitting easy mobility and also efficient air flow. It is also made of flame-retardant polyester, making it safe from dirt bits. The enclosure additionally secures the functioning surface area under the maker.
The XTool D1 is equipped with a laser module that is capable of engrave on metals as well as numerous other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This permits finer engraving and also greater accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it possible to inscribe on a wide range of products. The D1 also has a built-in mobile phone application that can be downloaded from the Android Shop or the Apple Application Shop. The application can be utilized to import laser designs from free vector websites, consisting of Etsy. The D1 can additionally be attached to a computer by means of USB or WiFi. It can additionally transfer data via Wi-Fi or a large ability TF card.
The D1 is capable of engraving on Poplar plywood, which is one of one of the most commonly utilized woods for laser cutters. The D1 can additionally cut on other woods, including hard maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm array. It can likewise refine materials as much as 10mm thick, which implies that it is able to engrave on a wide array of materials. The D1 is created for both house and also company use.
The XTool D1 comes in two models: the 20W version and also the 5W model. The 20W variation has a bigger laser head, as well as a smaller working location. The 5W version has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a much faster machine. Xtool Vag401 Menus
The D1 includes a steel structure, which provides maximum security as well as sturdiness. It additionally has a concurrent belt to enhance motion precision. The belt’s moderate stress is required for accuracy, especially when moving at high speeds. The simultaneous belt can likewise aid the maker keep steady as well as lessen vibration. It can additionally remove the motion space, enabling fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It produces clear lines down to 0.06 mm. This makes it a superb option for nearly all etching jobs. Its style is safe and reputable. It is ideal for small companies and hobbyists.
It can inscribe different sorts of metal and wood. It has the ability to cut 8 to tenmm plywood in one pass. It additionally has the capacity to cut natural leather as well as acrylic.
It features a number of accessories. You can acquire the bundle pack that includes the Air Assist Establish and also Honeycomb Working Panel. It costs $119 and $269, respectively. You can also get a 1064nm laser head. This head decreases melt marks in plastic as well as is particularly useful for fragile precious jewelry designs. It additionally has an activity sensor as well as fire discovery sensing unit.
It likewise includes an emergency stop switch. It can be controlled through Wi-fi and also can import laser layouts from complimentary vector sites like Etsy. You can also control it using the Makeblock XTool D1 application on Android as well as iOS.
It has a very good focus mechanism. The laser crosshairs relocate as needed as well as transfer to the structure of the art work. This makes the inscribing extremely exact. It can additionally be made use of to develop a thickening effect, which can be beneficial when inscribing large things.
The XTool D1 Pro has actually enhanced features and also laser power. It uses a 20W laser component to produce a beam of light that reduces items in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this equipment is very clever. Next to the laser component, there is a pivoting arm which you take out when you want to concentrate the laser. It guarantees that you drop the directly the appropriate range from the material. After that you tighten the thumb screw and also pivot the arm back up. Xtool Vag401 Menus
XTool D1 Special Features
Right here are some of the top Special Functions of the XTool D1:
Wireless Connectivity
Device can be connected via USB or a Wi-fi. And also you can likewise regulate with a mobile phone application on Android or iphone.
Trimming and also Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Cloth, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The equipment can cut wood, especially Poplar plywood which is soft and it is the favored wood for all laser cutters.
I would certainly stay clear of some plastics like PVC as well as plastic because it releases hydrogen chloride gas while being cut. This gas is harmful as well as very destructive (your maker will rust rapidly).
We have actually evaluated the equipment with engraving as well as reducing various materials. You will find the outcomes of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other makers. This need to allow for more precision and less mechanical wobble when inscribing at high speeds. Xtool Vag401 Menus
Advanced Stepper Electric Motor Drivers
The machine has a very sophisticated controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. By doing this the electric motors are extremely exact and also quiet. The vehicle drivers likewise support homing treatment without utilizing restriction switches as the motorists determine present through electric motors and detect the limit by doing this. This is why this maker does not require physical limit changes for homing.
The equipment has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis rather than having to separate one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be regulated by means of Wi-Fi or USB. The laser engraver device automatically stops if an unintended touch occurs. This is great for individuals who are worried regarding safety. The tool is also compatible with Windows and Mac OS systems.
The XTool D1 software application is really easy to use. Once you have actually the artwork prepared, you can utilize the application to set up the laser. You can additionally customize the laser setups and also produce customized artwork. The app additionally includes a materials checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can inscribe over 100 products. The laser engraver device is easy to use and also comes with a safety cover. The maker has a service warranty of twelve month.
XTool D1 Engraving
The XTool D1 is an extremely functional etching machine. It cam be made use of to etch on all sorts of products/.
Here is a listing of products and also features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out machine. Precise, rapid and also sturdily constructed. It comes at a costs rate, however it is worth it for somebody that desires a great as well as nearly an industrial quality table leading laser engraver with the ability of rapid cutting and also precise engraving thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The initial laser engraving and also cutting machine on our list is XTool D1 pro, the best alternative to Glowforge. It remains in starting point because it has actually obtained the Red Dot Style 2022 Award. The outstanding style and cutting edge modern technology established this maker besides various other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut and inscribe a significant range of materials, from something as slim as tissue paper to something as thick as natural leather and wood panels.
XTool D1 is a diode laser engraving and cutting machine that is compatible with a large range of products, consisting of different sorts of wood. Its powerful as well as extremely focused laser can easily cut and also etched wood with ultimate precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is particularly made for steel and also plastic inscription. It can engrave different metals, consisting of light weight aluminum and also precious metals. It can likewise do colored inscribing on different metals, including light weight aluminum.