What is the Makeblock XTool D1? Xtool X100 Pro Honda 2014
XTool D1 is a laser cutter that has been developed by Makeblock. Xtool X100 Pro Honda 2014
The firm was established in 2012 by Jasen Wang, who examined airplane style at Northwestern Polytechnic University. The firm is dedicated to producing cutting-edge products to assist people express themselves through development. Because its development, Makeblock has launched a number of academic robotics, as well as a coding system for youngsters. It likewise released the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that can reducing as well as engraving a selection of materials. Its laser can remove intricate shapes much faster than a scroll saw or jigsaw, and also can be made use of for various projects. Along with engraving, the D1 can also be utilized for various other tasks, consisting of creating precious jewelry and light tones.
The D1 is a do it yourself package that can be constructed in just about half a hr. Its unit is collapsible, enabling easy portability and also effective air flow. It is additionally constructed from flame-retardant polyester, making it risk-free from dirt particles. The enclosure additionally shields the working surface area under the maker.
The XTool D1 is equipped with a laser module that can engrave on steels and also many other products. It has an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This allows for finer inscription and higher accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to inscribe on a large range of materials. The D1 additionally has an integrated smart device app that can be downloaded from the Android Shop or the Apple Application Store. The application can be utilized to import laser layouts from free vector sites, consisting of Etsy. The D1 can also be connected to a computer through USB or WiFi. It can additionally transfer data by means of Wi-Fi or a large capacity TF card.
The D1 can inscribing on Poplar plywood, which is just one of the most commonly utilized woods for laser cutters. The D1 can likewise cut on various other timbers, including difficult maple, walnut, and also rosewood. Its laser head is adjustable, allowing for a 50mm array. It can also process materials as much as 10mm thick, which indicates that it has the ability to engrave on a wide array of products. The D1 is designed for both house as well as service usage.
The XTool D1 is available in two versions: the 20W version and also the 5W version. The 20W version has a bigger laser head, and a smaller working location. The 5W model has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, which makes it a faster maker. Xtool X100 Pro Honda 2014
The D1 includes a steel frame, which gives optimum security and also toughness. It additionally has a simultaneous belt to boost movement accuracy. The belt’s modest tension is required for accuracy, specifically when relocating at broadband. The synchronous belt can also help the maker remain steady and also decrease vibration. It can additionally remove the activity gap, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the market. It produces clear lines down to 0.06 mm. This makes it a superb selection for nearly all engraving tasks. Its design is secure as well as trustworthy. It is excellent for local business and hobbyists.
It can etch different types of metal and also timber. It has the capacity to cut 8 to tenmm plywood in one pass. It likewise has the ability to cut natural leather as well as polymer.
It features a variety of accessories. You can acquire the package pack that includes the Air Assist Establish and Honeycomb Working Panel. It costs $119 and $269, specifically. You can additionally obtain a 1064nm laser head. This head minimizes melt marks in plastic as well as is particularly valuable for fragile precious jewelry layouts. It also has a movement sensor as well as fire discovery sensor.
It also features an emergency situation stop button. It can be regulated through WiFi and also can import laser layouts from complimentary vector websites like Etsy. You can also control it through the Makeblock XTool D1 app on Android and also iphone.
It has a very good emphasis system. The laser crosshairs move as needed and move to the framework of the artwork. This makes the etching really precise. It can also be utilized to produce a thickening impact, which can be beneficial when engraving large products.
The XTool D1 Pro has boosted features as well as laser power. It uses a 20W laser component to produce a beam of light that cuts items in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It also has a greater rate. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this equipment is very clever. Alongside the laser module, there is a swivelling arm which you pull out when you intend to focus the laser. It guarantees that you go down the head on the correct range from the product. Then you tighten up the thumb screw and also pivot the arm back up. Xtool X100 Pro Honda 2014
XTool D1 Special Features
Below are some of the leading Special Functions of the XTool D1:
Wireless Connection
Machine can be attached by means of USB or a WiFi. And also you can also regulate with a mobile phone application on Android or iOS.
Cutting and Engraving Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Steel, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The equipment can cut timber, specifically Poplar plywood which is soft as well as it is the recommended wood for all laser cutters.
I would certainly prevent some plastics like PVC and vinyl considering that it releases hydrogen chloride gas while being reduced. This gas is toxic and extremely harsh (your device will certainly corrosion rapidly).
We have evaluated the device with engraving as well as reducing various products. You will locate the results of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all other machines. This need to permit even more accuracy and also less mechanical wobble when etching at high speeds. Xtool X100 Pro Honda 2014
Advanced Stepper Motor Drivers
The machine has an extremely innovative controller board. It has Trinamic stepper motor motorists which drive the electric motors with a pure sine wave. In this manner the electric motors are really specific as well as quiet. The chauffeurs likewise sustain homing procedure without making use of restriction switches as the drivers determine current through electric motors and spot the limit this way. This is why this maker does not require physical limitation switches over for homing.
The equipment has chauffeurs for 3 axis– so you can plug in the roller system as a Z axis rather than having to detach one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver device instantly quits if an unexpected touch takes place. This is excellent for people who are worried concerning safety. The tool is additionally suitable with Windows as well as Mac OS systems.
The XTool D1 software is really easy to use. Once you have the art work prepared, you can make use of the application to establish the laser. You can also personalize the laser setups and develop custom artwork. The app also includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting device that can engrave over 100 materials. The laser engraver device is easy to use and also features a protective cover. The machine has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a really flexible inscribing machine. It cam be used to inscribe on all types of materials/.
Below is a list of materials and attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out machine. Exact, fast as well as sturdily developed. It comes at a costs price, but it is worth it for somebody that wants a good and also practically a commercial grade table leading laser engraver efficient in rapid cutting and also specific engraving thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and also reducing maker on our listing is XTool D1 pro, the most effective option to Glowforge. It remains in top place because it has gotten the Red Dot Style 2022 Award. The superior style as well as advanced innovation established this equipment in addition to other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and also XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can cut and inscribe a substantial range of materials, from something as slim as tissue paper to something as thick as natural leather and wood panels.
XTool D1 is a diode laser inscription and cutting device that works with a vast array of products, consisting of different sorts of timber. Its powerful and also highly focused laser can easily cut as well as etched wood with utmost precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is particularly made for steel and plastic engraving. It can engrave different steels, including light weight aluminum and also precious metals. It can additionally do tinted engraving on numerous steels, including aluminum.